Eloise 4-in-1 Convertible Crib: Setup and Conversion Basics
By Modern Nursery® | Published: 2026-11-01
Category: How-to Guides
A practical, step-by-step guide to assembling the Eloise 4-in-1 Convertible Crib and converting it from crib to toddler bed, daybed, and full-size bed, with checkpoints to avoid common mistakes.
Quick answer
Set up the Eloise 4-in-1 Convertible Crib by assembling the crib first, then convert it to a toddler bed, daybed, or full-size bed as your child grows. Follow the steps below and use the checkpoints to avoid common mistakes.
Why the Eloise conversion sequence matters
The Eloise is designed to transition from a crib to a toddler bed, then a daybed, and finally a full-size bed. Each conversion changes which parts you need and how the mattress is supported, so doing them in the right order prevents missing hardware or unstable setups.
What you need before you start
Gather the crib, the conversion kit for your target stage (toddler rail, daybed rail, or full-size bed rails), and the assembly tools specified in the manual. The Eloise crib itself includes the basic crib hardware, but conversion kits may be sold separately depending on the stage.
When to convert and what to expect
Convert to a toddler bed when your child can climb out of the crib or reaches the height limit in the manual. Move to a daybed when they no longer need the toddler rail, and to a full-size bed when they are ready for a larger mattress. Each stage uses different mattress heights and rail configurations.
Step-by-step setup and conversion
- Unpack and sort all parts: Lay out all crib components, hardware, and the manual. Check each part against the parts list before assembly. Common mistake: starting assembly before confirming all pieces are present, which can lead to missing hardware later. Keep the manual and hardware bag together in a labeled bag for future conversions.
- Assemble the crib frame: Follow the manual to attach the headboard, footboard, and side rails. Use the specified tools and tighten all bolts securely. Common mistake: over-tightening bolts before the frame is square, which can cause misalignment. After assembly, gently shake the crib to check for stability before placing a mattress.
- Set the mattress support to the highest position for a newborn: Install the mattress support at the highest level for easy access to a newborn. Lower it as your child grows. Common mistake: forgetting to lower the support before your child can sit up, which can create a fall risk. Mark the date you lowered the mattress support so you remember when to adjust it again.
- Convert to a toddler bed: Remove one side rail and attach the toddler rail (if included or sold separately) according to the manual. Lower the mattress support to the lowest position. Common mistake: using the crib without the toddler rail, which leaves an open edge. Check that the toddler rail is secure and that there are no gaps between the rail and mattress.
- Convert to a daybed: Remove the toddler rail and the remaining side rail, leaving one side open. Keep the mattress support at the lowest position. Common mistake: leaving the mattress at a higher position, which can make the daybed too high for your child to get in and out safely. Ensure the daybed is placed away from walls or furniture that could be climbing hazards.
- Convert to a full-size bed: Remove the crib side rails and attach the full-size bed conversion rails (sold separately) following the manual. Use a standard full-size mattress. Common mistake: using a crib mattress, which is too small and creates gaps. Verify that the conversion rails are firmly attached and that the bed frame is stable before use.
Product facts
- Eloise 4-in-1 Convertible Crib: The Eloise 4-in-1 Convertible Crib is GREENGUARD GOLD certified. This certification means the crib has been tested for low chemical emissions, which can be a consideration for indoor air quality in your nursery.
Eloise 4-in-1 Convertible Crib - Eloise 4-in-1 Convertible Crib: The Eloise transitions from a crib to a toddler bed, daybed, and full-size bed. Knowing the full sequence helps you plan which conversion kit to buy now and which can wait until your child is older.
